Industrial Maintenance Technology - AAS
Keokuk campus
Industrial Maintenance Technology - AAS
The Industrial Maintenance Technology program provides students with technical skills in maintaining and troubleshooting electrical and mechanical systems used in the industry. Mechanical and electrical theory are covered throughout the program, including how to troubleshoot and repair industrial systems. Instruction is delivered in a format designed for flexibility and customization based upon the desired career path of each individual student.
The Electrical Maintenance Technology certificate is awarded after successful completion of first semester courses.
The Mechanical Maintenance Technology certificate is awarded after successful completion of second semester courses.
The Industrial Maintenance Technology diploma is awarded after successful completion of the first and second semesters.
*Certificates and diploma can be earned one time.
Summary Sheet
The summary sheet provides a program overview and other information.
Curriculum Sequence |
||
First Semester | Course Title | Credit |
ELE-195 | Motor Controls | 3 |
ELE-310 | Industrial Electricity | 2 |
ELT-250 | Programmable Logic Controllers | 3 |
ELT-295 | AC/DC Fundamentals | 2 |
MAT-702 | Introduction to Math Applications | 3 |
Take WBL-110 as 1 credit: | ||
WBL-110 | Employability Skills | 1-3 |
Semester Total: | 14 | |
Second Semester | Course Title | Credit |
EGT-142 | Fluid Power 1 | 2 |
EGT-143 | Fluid Power 2 | 2 |
ELE-116 | Blueprint Reading | 1 |
IND-104 | Industrial Pumps | 1 |
IND-141 | Power Transmission | 2 |
MFG-209 | Machine Shop Practices | 3 |
MFG-520 | Predictive Maintenance | 2 |
Take 1 of these courses: | ||
PSY-102 | Human and Work Relations | 3 |
PSY-111 | Introduction to Psychology | 3 |
SOC-110 | Introduction to Sociology | 3 |
Semester Total: | 16 | |
Third Semester | Course Title | Credit |
EGT-147 | Hydraulic Power Systems and Troubleshooting | 1 |
ELT-132 | Motor Drives | 1 |
ELT-262 | Advanced PLC and System Integration (Mechatronics) | 6 |
ENG-105 | Composition I | 3 |
IND-106 | Machine Shop II | 2 |
IND-107 | Valves | 1 |
Semester Total: | 14 | |
Fourth Semester | Course Title | Credit |
ELE-127 | Troubleshooting | 1 |
ELT-176 | Instrumentation | 3 |
IND-179 | Boiler Operation and Control | 2 |
IND-180 | Industrial Heating and Cooling | 2 |
CAD-101 | Introduction to CAD | 3 |
Take 1 of these courses: | ||
HIS-151 | US History to 1877 | 3 |
HIS-152 | US History Since 1877 | 3 |
PHI-101 | Introduction to Philosophy | 3 |
PHI-105 | Introduction to Ethics | 3 |
Take 1 of these courses: | ||
BIO-105 | Introductory Biology | 4 |
ENV-111 | Environmental Science | 4 |
PHS-151 | Introduction to Astronomy | 3 |
Semester Total: | 17-18 | |
PROGRAM TOTAL: | 61-62 |
ELE-195 - Motor Controls |
||||
Lecture: 1 |
Lab: 4 |
Credit: 3 |
||
This course discusses Motor Controls, components, operation and service. Students will learn electric relay control of AC and DC electric motors found in industrial applications. Students will also learn industry-relevant skills including how to operate, install, design and troubleshoot AC and DC motor control circuits. |
||||
ELE-310 - Industrial Electricity |
||||
Lecture: 1 |
Lab: 2 |
Credit: 2 |
||
This course discusses important properties of electricity and the common electrical elements found in industrial settings. Students will learn how to install and wire electrical components. Students will also learn how to layout a project; estimate wiring quantities, lengths, and sizes between panels and properly size and install conduit. The course will introduce the national OSHA safety standards and upon completion of this course students will receive the OSHA 10 hour certification. |
||||
ELT-250 - Programmable Logic Controllers |
||||
Lecture: 1 |
Lab: 4 |
Credit: 3 |
||
This course introduces students to PLC tasks such as programming, wiring, troubleshooting, communications and advanced programming. Students will learn industrial relevant skills on how to operate, interface, program and troubleshoot PLC systems. Students will learn how to set up software drivers, log onto networks, upload and download projects and search for documentation. |
||||
ELT-295 - AC/DC Fundamentals |
||||
Lecture: 1 |
Lab: 2 |
Credit: 2 |
||
This course introduces students to the components used in most electronic circuits and how they are measured, tested and function. Students will learn the fundamentals of AC and DC electrical systems used for power and control in industrial applications. Students will learn how to operate, install, design and troubleshoot basic AC and DC electrical circuits. |
||||
MAT-702 - Introduction to Math Applications |
||||
Lecture: 2 |
Lab: 2 |
Credit: 3 |
||
This course is offered to students who can profit from an applied course in mathematics and will prepare students who need to develop skills for MAT-704. It is designed as an introductory level algebra course recommended for students with one year of high school algebra. Emphasis is on the building of basic algebra skills and the application of these mathematical techniques. The course studies the relationship of geometry and algebra as they apply to various fields. This course will also cover whole numbers/decimals, integers, fractions/percents, direct measurement, basic geometric concepts/relationships, linear equations and right-triangle trigonometry. Prerequisite: MAT-052 or meet minimum placement testing requirements. |
||||
WBL-110 - Employability Skills |
||||
Lecture: 1-3 |
Credit: 1-3 |
|||
This course is designed to assist students in developing the skills necessary to obtain employment, and to learn and practice the skills and attitudes required for job success. Students will practice resume writing, job application completion and interviewing techniques. Additionally, students will practice work-place problem solving strategies and demonstrate skills required to work in a diverse environment. Prerequisite: WBL-150 is recommended. |
||||
EGT-142 - Fluid Power 1 |
||||
Lecture: 1 |
Lab: 2 |
Credit: 2 |
||
This course discusses the fundamentals of hydraulic technology. Students will learn hydraulic circuits, pumps, actuators, valves, fluid, safety, maintenance and troubleshooting. Students will also learn how to operate, install, analyze performance and design hydraulic systems. |
||||
EGT-143 - Fluid Power 2 |
||||
Lecture: 1 |
Lab: 2 |
Credit: 2 |
||
This course discusses the fundamentals of pneumatic technology. Students will learn specific skills needed to understand the principles of pneumatics including circuits with compressed air power, air processing, valves, safety, maintenance and troubleshooting. Students will learn industry skills including how to operate, install, analyze and design pneumatic systems. |
||||
ELE-116 - Blueprint Reading |
||||
Lecture: 1 |
Credit: 1 |
|||
This course discusses the specific data that is drawn on a blueprint and explains how to read and interpret the drawing format. Students will learn orthographic and isometric drawings to understand shapes, sizes and dimensions. Students will study building terms and construction features of carpentry, masonry, electrical, mechanical and plumbing trades. |
||||
IND-104 - Industrial Pumps |
||||
Lecture: 0.5 |
Lab: 1 |
Credit: 1 |
||
This course discusses the principles and applications of centrifugal pumps. Students will learn centrifugal pump construction, uses, system properties, monitoring and troubleshooting techniques. Students will also learn the skills they need to select, operate, install, maintain and repair the many different types of pumps used in industry. |
||||
IND-141 - Power Transmission |
||||
Lecture: 1 |
Lab: 2 |
Credit: 2 |
||
This course discusses the fundamentals of mechanical transmission systems used in industry. Students will learn industrial skills on how to operate, install, analyze performance and design basic mechanical transmission systems using chains, v-belts, spur gears, bearings and couplings. |
||||
MFG-209 - Machine Shop Practices |
||||
Lecture: 1 |
Lab: 4 |
Credit: 3 |
||
Classroom and hands on training will be provided in machine shop safety and the use of machine shop tools and machines. Training will include proper use of hand tools, measuring tools, milling machines, grinders, lathes, drills and saws. |
||||
MFG-520 - Predictive Maintenance |
||||
Lecture: 1 |
Lab: 2 |
Credit: 2 |
||
This course discusses the principles of machinery oil analysis, thermography, ultrasonics and machine vibration. Students will learn how to properly diagnose an equipment failure. Students will also learn steps to prevent equipment failures and keep equipment running efficiently. |
||||
PSY-102 - Human and Work Relations |
||||
Lecture: 3 |
Credit: 3 |
|||
This is a course that includes the understanding of the applications of psychological principles, theory and research related to the work setting. |
||||
PSY-111 - Introduction to Psychology |
||||
Lecture: 3 |
Credit: 3 |
|||
A basic course in the understanding of behavior, designed to give the student a scientific background in the fundamental problems and techniques covered in the field of psychology. |
||||
SOC-110 - Introduction to Sociology |
||||
Lecture: 3 |
Credit: 3 |
|||
An analysis of social organization (or the social order). This course deals with the nature of sociology as a science, the original nature of man, the socialization of the individual, the development of groups and group behavior, the nature of culture and culture patterns, the organization of institutions, the nature of social order, the organization of human stratification and examination of major social processes. Special emphasis is placed upon the American cultural patterns. |
||||
EGT-147 - Hydraulic Power Systems and Troubleshooting |
||||
Lecture: 0.5 |
Lab: 1 |
Credit: 1 |
||
This course will cover the operation, diagnosis and maintenance of basic and complex hydraulic systems. Prerequisite: EGT-142. |
||||
ELT-132 - Motor Drives |
||||
Lecture: 0.5 |
Lab: 1 |
Credit: 1 |
||
This course discusses the fundamentals of motor drive operation and setup. Students will learn industrial AC electronic motor drives, which are used to provide accurate control of speed, position and acceleration of industrial motors. Students will also learn industrial skills on how to operate, install, tune and troubleshoot various industrial drives. Prerequisite: ELE-195. |
||||
ELT-262 - Advanced PLC and System Integration (Mechatronics) |
||||
Lecture: 2 |
Lab: 8 |
Credit: 6 |
||
This course introduces advanced topics in programmable logic controllers using the Allen-Bradley ControlLogix and RSLogix 5000 programming software including programming input, output, bit, timer, counter, compare, move and math instructions. Students will learn how to create and modify subroutines and configure devices. Students will learn industrial relevant skills on how to operate, program and troubleshoot PLC systems and learn system integration with, electrical, mechanical, pneumatic and robotic devices. |
||||
ENG-105 - Composition I |
||||
Lecture: 3 |
Credit: 3 |
|||
A study of the principles of writing. Emphasis on rhetoric, mechanics and development of expository patterns: narration, description illustration, comparison/contrast, classification, process and cause/effect. Required for AA and AS Degrees. Prerequisite: Meet minimum test score requirements. |
||||
IND-106 - Machine Shop II |
||||
Lecture: 1 |
Lab: 2 |
Credit: 2 |
||
This course introduces students to the basics of calculating cutting speeds and feeds for machining ferrous, non-ferrous and plastics materials on the lathe. It also demonstrates the fundamentals of mounting a chuck on an engine lathe and truing a work piece in a chuck and introduces students to the three methods of facing work to length in a chuck. The course will show students how to straight turn a work-piece to two concentric diameters in a four-jaw independent chuck. Students will learn the correct procedures for taking both roughing and finishing cuts. They will also learn to turn between centers. Finally, students will learn the proper method of finishing one end of work to one diameter, reversing the work in the chuck and finishing the other end to another diameter. It will demonstrate how to perform four internal machining operations on the engine lathe; drilling, boring, counter-boring and reaming. |
||||
IND-107 - Valves |
||||
Lecture: 1 |
Credit: 1 |
|||
This course gives students a fundamental understanding of the various shutoff valve constructions including wedge, ball, plug, globe, pinch and diaphragm types, basic maintenance techniques and the sources of many problems. From this foundation, students will be better able to develop maintenance skills through plant training programs or on-the-job experiences. The course also provides basic guidelines for installing various types of shutoff valves. |
||||
ELE-127 - Troubleshooting |
||||
Lecture: 0.5 |
Lab: 1 |
Credit: 1 |
||
This course introduces students to the fundamental sequence of steps that can be applied when attempting to locate and repair problems in electrical and mechanical equipment. Students will learn how to use proper testing equipment to assist in finding faulty components. Students will learn how to plan a course of action for troubleshooting and repairs of equipment. |
||||
ELT-176 - Instrumentation |
||||
Lecture: 1 |
Lab: 4 |
Credit: 3 |
||
This course introduces students to the basic principles and concepts of process control, calibration, replacement, repair adjustment, troubleshooting and use of test equipment. Students will learn how to calibrate, adjust, install, operate, and connect process control systems. Students will also learn how to measure signals and connect devices in a wide variety of control configurations including: PID control, on/off control and manual control. Prerequisite: ELT-295. |
||||
IND-179 - Boiler Operation and Control |
||||
Lecture: 1 |
Lab: 2 |
Credit: 2 |
||
This course is designed to help students understand the evolution of the boiler system from the first century to modern day and understand the principles and applications of steam traps. This course will provide an overview of the operation of the boiler plate system, beginning with basic principles of steam energy and boiler plate design. This course will describe steam, steam trapping and different types of steam traps including sizing, installation and monitoring. |
||||
IND-180 - Industrial Heating and Cooling |
||||
Lecture: 1 |
Lab: 2 |
Credit: 2 |
||
This course is designed to help students understand the fundamentals of HVAC & R. The students will learn chiller, air handler, cooling tower and condenser operations as well as how to perform basic preventative maintenance tasks. The course also shows how preventative maintenance practices can be used in troubleshooting common HVAC & R problems. |
||||
CAD-101 - Introduction to CAD |
||||
Lecture: 1 |
Lab: 4 |
Credit: 3 |
||
An introduction to computer aided design and drafting. Actual hands-on experience in designing, drawing and dimensioning using CAD micro-based CAD software. The course presents logical step-by-step instruction about the CAD commands, mode settings, drawing aids, shortcuts and other valuable characteristics of CAD. Finished copies of the students’ work will be made on a printer or plotter. |
||||
HIS-151 - US History to 1877 |
||||
Lecture: 3 |
Credit: 3 |
|||
A survey of American social, political, economic and intellectual developments from the Colonial period to 1877. |
||||
HIS-152 - US History Since 1877 |
||||
Lecture: 3 |
Credit: 3 |
|||
A survey of American social, political, economic and intellectual developments since 1877. |
||||
PHI-101 - Introduction to Philosophy |
||||
Lecture: 3 |
Credit: 3 |
|||
A topical introduction to the major areas of philosophical inquiry. |
||||
PHI-105 - Introduction to Ethics |
||||
Lecture: 3 |
Credit: 3 |
|||
A survey of the major ethical emphases from ancient to modem times with pertinent reading in the works of representative philosophers. |
||||
BIO-105 - Introductory Biology |
||||
Lecture: 3 |
Lab: 2 |
Credit: 4 |
||
Introductory Biology is a lecture and lab course designed for non-science majors or as a refresher course of those wishing to take higher-level biology courses. Topics include chemistry of life, molecular and cellular biology, genetics, evolution, plant, animal, and fungi classification and ecology. |
||||
ENV-111 - Environmental Science |
||||
Lecture: 3 |
Lab: 2 |
Credit: 4 |
||
An interdisciplinary approach to the problems of the environment. An examination and evaluation will be made of man’s impact on the environment. Specific topics that may be covered include, but are not limited to: population issues, atmospheric issues, water issues, energy issues, resource issues, wildlife issues and food issues. |
||||
PHS-151 - Introduction to Astronomy |
||||
Lecture: 2 |
Lab: 2 |
Credit: 3 |
||
A survey of astronomy including historical considerations, the solar system, the universe and special topics. Topics may include the laws, the methods and current research. Each planet will be studied as well as major stars and galaxies. Special topics include: cosmology, cosmogony, nova, pulsars, quasars, relativity, space travel, black holes and other space mysteries. Lab to include: experiments, observations, slides and movies. |
Jason Radel - Instructor, (319) 524-3221 ext. 1990
Email: jradel@scciowa.edu
AAS-Electrical Technology, Northwest Iowa Community College
AAS-Biomedical Electronics, Southeastern Community College
RS Logix 5000 and Control Logix Certified
Paul Volkl - Instructor, (319) 524-3221 ext. ext. 1937
Email: pvolkl@scciowa.edu
AAS, Muscatine Community College
BS, Orion Technical College
Learn more about where this degree can take you. Cruise SCC's Career Coach.
- Real-Time, Local Job Listings
- Salary Projections
- Job Demand
- Related Degrees